Features & Benefits

---

• IDEAL FOR: Sealing doors, windows, soffits and awnings around vinyl, aluminum, stucco, wood, brick and glass.
• SEALS: Vinyl, aluminum, stucco, wood, brick, cement, glass and most common building materials.
• Excellent adhesion to siding materials
• Exterior - High performance
• Superior flexibility & durability
• Easily paintable - Water cleanup
• Effective barrier to air, dirt, insects and radon

Application Guidelines

---

• Application Temperature: Above 40°F (4°C)
• Service Temperature Range: -35°F to 180°F
• Method of Application: Cartridge/caulking gun
• Working Time: Approximately 10-15 minutes for a 1/4" bead
• Application Directions: 1. Surfaces must be clean and free of any material that may prevent adequate adhesion. Properly designed joint not to exceed 1/2" in width. 2. Cut tip at 45° angle for 1/8" to 1/2" bead and place in cartridge gun. 3. Force sealant into clean joint. If necessary, smooth bead immediately. It is the sole responsibility of the user to thoroughly test any proposed use with all substrates to determine project suitability.
• Painting: The sealant should be dry to the touch and ready to paint in 2-4 hours with a high-quality acrylic, water-based (latex) paint that does not contain plasticizer. For other paint types, a compatibility test is recommended.
• Cleanup: Clean uncured material with water. After curing, excess sealant must be cut or scraped away.
• Coverage:

  Container	1/8” Bead	1/4" Bead	3/8" Bead	1/2" Bead
  10.1 oz. Cartridge	123 ft.	31 ft.	14 ft.	8 ft.

Physical Properties

---

• Type: Acrylic
• Calculated VOC: <50 g/L (<1.5%)
• Color: White and colors
• Solids: 82%
• Flashpoint: Solvent free/Not applicable
• Viscosity: 450,000 cps
• Freeze / Thaw Stability: Stable
• Storage Life: 24 months in a dry location at or below 75°F

Limitations

---

Not designed for continuous submersion or use below the waterline. Air, sealant and surface temperature should be above 40°F. Do not apply if rain is expected within 12 hours. Cure time is dependent upon ambient conditions including temperature and humidity. The sealant should be dry to the touch and ready to paint in 2-4 hours with a high-quality acrylic, water-based (latex) paint that does not contain plasticizer. For other paint types, a compatibility test is recommended. It is highly recommended to use backing material. For best results, store in a dry location at or below 75°F.

Product SKUs

---

Part Number	UPC	Case UPC	Size	Weight	Units Per Package	Packages Per Pallet	Color
3301	037083033014	10037083033011	10.1 Oz. Cartridge - White	15.00	12	108
3311	037083033113	10037083033110	10.1 Oz. Cartridge - Cape Gray	13.20	12	108
3321	037083033212	10037083033219	10.1 Oz. Cartridge - Almond	13.20	12	108
3331	037083033311	10037083033318	10.1 Oz. Cartridge - Brown	15.00	12	108
3351	037083033519	10037083033516	10.1 Oz. Cartridge - Clay	15.00	12	108
3361	037083033618	10037083033615	10.1 Oz. Cartridge - Cedar	15.00	12	108

Warranty Statement

---

45 Year Limited Warranty: If not satisfied with product performance when used as directed, return container and proof of purchase to Franklin International, Inc. for replacement of product. Liability is limited to product replacement only.

---

Important Notice: Our recommendations, if any, for the use of this product are based on tests believed to be reliable. Since the use of this product is beyond the control of the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or effects incidental to such use, handling or possession or the results to be obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.

---

2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-4583
www.titebond.com